UNIX BLOG
Blog for NIX system based administrators
mdadm
mdadm sending ioctl 1261 to a partition!
mdadm sending ioctl 1261 to a partition! and probably failing of one HDD drive If you get this message in linux mdadm config. Then you need to check mdadm settings with the following command: cat /proc/mdstat If you got cat /proc/mdstat Personalities : [raid1] md2 : active raid1 sda3[0] 935745400 blocks super 1.2 […]
Posted in Linux Administration | No Comments »
How to install raid10 mdadm -l f2 with hetzner rescue image
Introduction: How to install raid10 with 4 or more drives with hetzner with faster disk layout -f2 I tested raid10 with 3 layouts(n2, f2, and o2) , HDD SEAGATE drives are 3TB with around 180MB/s speed. Every new Seagete hetzner Drive drive have 3 plates , Model ST3000DM001 Test with one HDD hdparm -t /dev/sda1 […]
Tags: hetzner, image, mdadm, raid10, rescue, software raid
Posted in Linux Administration | 1 Comment »